Your cart is empty

1.8“ HITACHI 30GB HDD replace Toshiba MK3008GAL HDD 5MM

£39.99  £29.99
Save: 25% off
1.8“ HITACHI 30GB HDD replace Toshiba MK3008GAL HDD 5MM

1.8" 30GB HITACHI  IPOD HDD

Key Features:

• Formatted capacity : 30GB
• High Speed Digital Signal Processor Based Architecture
• Low Power HDC
• Advanced Power Management Control
• Fluid Dynamic Bearing Spindle Motor Technology
• SATA S.M.A.R.T Compliant
• SATA 28-bit Address Feature Set
• Multi-Burst On-The-Fly Error Correction
• SilentSeek™
• Free Fall Sensor (optional)
Target Application

Drive Configurations Capacity * 30 GB
Interface PATA/ZIF
Buffer DRAM Size  2 MB
Byte per Sector  512
Performance Specifications Average S
eek time (typical)  15.0 ms
Average Latency  7.14 ms
Media Transfer Rate (Max.) 458 Mb/s
Interface Transfer Rate (Max.)  100 MB/s
Drive Ready Time (typical) 2.0 sec
Reliability Specifications Non-recoverable Read Error  1 sector in 10^13 bits
Controlled Ramp Load/Unload  600,000
Acoustics Idle  6 Bel
Performance Seek  1.8 Bel
Environmental Specifications Temperature / Operating  5 ~ 60 ℃
Temperature / Non-operating  -40 ~ 85 ℃
Humidity (non-condensing) / Operating  8 ~ 90 %
Humidity (non-condensing) / Non-operating  8 ~ 90 %
Liner Shock (1/2 sine pulse) / Operating  600 G
Liner Shock (1/2 sine pulse) / Non-operating  1500 G
Vibration / Operating  0.67 Grms
Altitude (relative to sea level) / Operating  -300 to 3.000 m
Altitude (relative to sea level) / Non-operating  -400 to 15,000 m
Power Requirements Voltage  +3.3V ±5%
Spin-up Current (Max.)  400 mA
Seek (typical)  0.8 W
Read/Write (typical)  0.9 W
Idle  0.30 W
Standby (typical)  0.07 W
Sleep (typical)  0.07 W

Physical Dimension Height (Max.)  5.0 mm
Width  71.0 mm
Length  54.0 mm
Weight ( avg.) 48 g

 

1X1.8" 30GB HITACHI Hard Drive



Add to Cart:

thepartneringinitiativebluzzin
walitefree